[Jewelry making - Article 00253] - Re: [Orchid] Pricing ring sizings

[Ala]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

Richard,

    What you say is correct and it looks as if your employer is stuck in
    the past. 

    I hope you are paid a wage and not receiving a cut of what your
    employer charges. If you are paid a wage then your main concern
    should be the viability of your employers' business, which means your
    job and getting paid. Persuade your employer to buy David Geller's
    book, or even buy it yourself and let you employer 'find' it! 

    If you are paid a cut then start setting your own prices (and now I
    would read between the lines of David Geller's book) because at this
    time you are taking the losses and your 'employer' receives the
    goodwill. Depending on your circumstances this may be very difficult
    to do, but persevere and sooner or later take responsibility for what
    you charge. 

All the best, Alastair.
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________