[Jewelry making - Article 00015] - Re: [Orchid] Laser Wire Feeding Tool?

[Neilthejeweler]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    All good ideas, TY. 

    My hope is to find, or make, something small enough to work easily
    in the chamber, yet with some simple mechanism to advance the wire
    without a lot of hooha. Preferably some sort of trigger or pressure
    wheel actuated thing that would work with one hand, so I don't have
    to withdraw the tool from the chamber, just keep on zappin. The time
    spent actually welding is nothing compared to the setup each time.
    Half the purpose of the welder is time savings so I'd like to
    maximize that.
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________