The Gem and Jewelry World's foremost Resource on The Internet.
Re: [Orchid] Realistic rocks drilling  
  [Thread Prev] [Message Prev]      [Date Index]   [Thread Index]      [Message Next] [Thread Next]
From: MJOAT
Date: Sat Apr 05 21:05:07 2008
 
     
========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    If they are any type of rock that is softer than a 9 (carbide) on
    the Mho's scale you can head to the hardware store and pick up a
    concrete carbide tip drill bit. They come in sizes from 1/8" up. If
    you have a drill press so much the better a plastic pan filled with
    water to cover the stone. Mostly to keep the dust down. You probably
    wouldn't need a 1/2 inch peg to hold the stone up with a good epoxy.
    Any thing from a couple of 1/8" dia holes to 1/4" would work. 

    Then use a metal instead of a wood peg, to mount the rock on. The
    carbide bits are a lot cheaper, than the diamond bits sold at the
    supply houses. And they will with some the addition of some water.
    Drill just about most stones out there. I have drilled thru any
    number of minerals and marble and granite types. 

    After all they are using all that kind for the overpriced counter
    tops and they have to get a starter hole in them some how for the
    sink cut out. 

    The water will not only keep the dust down but will act as a
    coolant. Heat is probably the biggest destroyer of stones when
    drilling. Just remember to lift the bit to clean the hole and let
    fresh water in often. 

glen
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________

  Click to Visit  
     
  Navigate:  
   
  Orchid Resources:  
   Join & Post
 Invite a friend to join Orchid
 F.A.Q
 Galleries
 BenchExchange
 Orchid Message Archives [Subject Index] [Date Index]

Ganoksin now offers a number of ways for you to stay on top of the latest from Orchid!

  1. My Yahoo - Do you have a My Yahoo page? If so, you can easily read the latest Orchid posts on your personalized page by adding this feed:Add Orchid to My Yahoo!
  2. Add Orchid to myGoogle Add to my Google
  3. Read Orchid with NewsGator and Microsoft Outlook Add Orchid to Your  NewsGator
Support Orchid! - If you believe in what we're doing, you can help!

 
     
     

© Copyright 1996 - 2008, The Ganoksin Project