The Gem and Jewelry World's foremost Resource on The Internet.
Re: [Orchid] Realistic rocks drilling  
  [Thread Prev] [Message Prev]      [Date Index]   [Thread Index]      [Message Next] [Thread Next]
From: Rick
Date: Fri Apr 04 21:50:15 2008
 
     
========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

>     Is it realistic to think a half inch to one inch deep hole could
>     be drilled into a stone? (probably granite). 

    Most lapidary drills that size are core drills. That wouldn't help
    in this case unless you wanted to chisel out the stone left by the
    core drill. I know there are drills for such an operation but I can't
    find them from my usual list of suspects... I mean suppliers. If you
    could find one it would probably be pricey ($100 or more). And you
    would have to use a drill press and water drip. 

    What I would suggest is using diamond carving bits. They sell cheap
    imported sets on eBay for pretty cheap. Any way, they have some bits
    that are about 1/8" in diameter and flat on the bottom. I would
    suggest drilling 2-3 holes in each stone then gluing 1/8" dowels or
    1/8" steel pins into each stone and mount it that way. 

    Be sure to use a water drip and drill slowly and pull the bit out
    often to let the hole flush with water or you will heat up the bit
    and the diamonds will be gone. 

Rick Copeland
President Colorado Springs Mineralogical Society
www.csms.us
Silversmith and Lapidary Artisan
Rocky Mountain Wonders
Colorado Springs, Colorado
rockymountainwonders.com
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________

  Click to Visit  
     
  Navigate:  
   
  Orchid Resources:  
   Join & Post
 Invite a friend to join Orchid
 F.A.Q
 Galleries
 BenchExchange
 Orchid Message Archives [Subject Index] [Date Index]

Ganoksin now offers a number of ways for you to stay on top of the latest from Orchid!

  1. My Yahoo - Do you have a My Yahoo page? If so, you can easily read the latest Orchid posts on your personalized page by adding this feed:Add Orchid to My Yahoo!
  2. Add Orchid to myGoogle Add to my Google
  3. Read Orchid with NewsGator and Microsoft Outlook Add Orchid to Your  NewsGator
Support Orchid! - If you believe in what we're doing, you can help!

 
     
     

© Copyright 1996 - 2008, The Ganoksin Project