[Jewelry making - Article 00112] - Re: [Orchid] Kiln for enameling small pieces

[BeadStorm]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    The microwave kilns have a limited lifespan and are pretty specific
    about the voltage range of the microwave that they will work on. If
    you are looking for a small kiln, I would recommend the small
    trinket-style kilns like the Ultralite kiln. These are small plug-in
    round kilns that have an optional controller (not temperature
    controlled, more of a high-med-low controller). The high temp on the
    controller will be approx 1500 degrees F, perfect for enameling, and
    with the metal insert it is perfect for keum-boo. 

BBR - Sandi Graves
Stormcloud Trading Co (Beadstorm)
Saint Paul, Minnesota
651-645-0343
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________