The Gem and Jewelry World's foremost Resource on The Internet.
Re: [Orchid] Appropriate gauge for flush setting  
  [Thread Prev] [Message Prev]      [Date Index]   [Thread Index]      [Message Next] [Thread Next]
From: John Donivan
Date: Wed Apr 02 23:41:05 2008
 
     
========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

>     so it's contacting the metal at about a 30 degree angle, a bit
>     shallower than John's description 

    That's pretty much how I do it, too. The 45 degree tool method I laid
    out requires the stone to be tight in the hole to begin with, and a
    more progressive rubbing is more forgiving of that. I think the
    biggest thing that the curious can walk away with from this thread,
    as Peter has somewhat un-knowingly illustrated, is the level of
    precision that "real" setters - people who set stones for a living -
    deal with. Yes, you can just bang in stones in many settings. You can
    gouge out bearing cuts in prongs, slap in a stone and walk away, but
    that's not great setting or even fine setting. And setting as a field
    of expertise gets progressively more difficult and demanding. That's
    one reason why there are times when it's better not to pretend to be
    one, and just send it out to a pro. It's also why good work habits
    and an ability to work and see to a level of precision is essential.
    Fine jewelry isn't a genre, it's jewelry that's fine - worked at a
    .01mm tolerance and the like. It's a state of mind.... 

http://www.donivanandmaggiora.com
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________

  Click to Visit  
     
  Navigate:  
   
  Orchid Resources:  
   Join & Post
 Invite a friend to join Orchid
 F.A.Q
 Galleries
 BenchExchange
 Orchid Message Archives [Subject Index] [Date Index]

Ganoksin now offers a number of ways for you to stay on top of the latest from Orchid!

  1. My Yahoo - Do you have a My Yahoo page? If so, you can easily read the latest Orchid posts on your personalized page by adding this feed:Add Orchid to My Yahoo!
  2. Add Orchid to myGoogle Add to my Google
  3. Read Orchid with NewsGator and Microsoft Outlook Add Orchid to Your  NewsGator
Support Orchid! - If you believe in what we're doing, you can help!

 
     
     

© Copyright 1996 - 2008, The Ganoksin Project