| |
|||
| The Gem and Jewelry World's foremost Resource on The Internet. |
| Re: [Orchid] Rust on tools | ||
|
[Thread Prev]
[Message Prev]
[Date Index]
[Thread Index]
[Message Next]
[Thread Next]
From: Callcbm Date: Fri Mar 28 21:31:46 2008 |
||
========[ Invite a Friend - http://www.ganoksin.com/invite.htm ]======== "Oxidation, per se, has little to do with oxygen, in an electrochemical sense. It is just the loss of one or more electrons. The oxidized forms of iron are Fe++ and Fe+++. Rust is a complicated mixture of oxides, hydroxides, and carbonates of iron. The tendency of iron to oxidize is affected by concentrations of ions such as halides that will form coordination compounds with the iron ions, thus lowering their chemical potential. Refer to the Nernst equation to understand this." So once rust starts You need to stop the reaction. Putting any thing over rust will keep rusting. One of the treatment for small parts are to submerge the part in a mixture I believe Sodium carbonate its a washing soda. mix this with water. Submerge the parts and connect a battery charger to Negative to the part and use a stainless Steel rod and connect to the positive I'm not sure if the polarity is right you may have to switch it. It's not fast but will do the job.When this is working right the stainless bar with receive the rust. The rust color will be removed. Any auto store that sell Automotive paints will have phosphoric acid it's used for the pre wash of the steel to neutralize the rust and etch the metal for better paint adhesion. All the product that are put on metal all have some draw back motor works but will oxidize with time an collect dust It also will transfer to any thing that touches it and can smell bad. Vegetable oils are similar but will polymer with age some time good some times bad Brownpolymer doesn't oxidize like oil will stay on one surface and not transfer doesn't collect dust and some even like the smell. Yes the cost is high reason being It not made in volume so materials are not purchased cheaply. the container cost are rising and you use very little of the product when used properly Plus it's still free shipping to almost any where in the world. it doesn't stop rust that has started but will keep moisture from metal once applied and is not effect by touch or use. The film is almost not seeable doesn't effect it use and can be used for other jobs. If you where to analyze it's cost compared to other products it's really cheap and also you don't have to keep applying each time so if you forgot to apply once you are still have the protection. Thanks Randy AKA Enjen Joes ____________________________________________________________________ T h e O r c h i d L i s t Open Electronic Forum for Jewelry Manufacturing Methods and Procedures ____________________________________________________________________ Orchid FAQ: ~ http://www.ganoksin.com/orchid/faq.htm Orchid Archives: ~ http://www.ganoksin.com/orchid/archive Orchid Galleries: ~ http://www.ganoksin.com/orchid/gallery.htm Invite a Friend: ~ http://www.ganoksin.com/invite.htm ____________________________________________________________________ Tips From The Jeweler's Bench - Article Archive ~ http://www.ganoksin.com/borisat/tip_sear.htm The Jeweler's Selected Bibliography List ~ http://www.ganoksin.com/jewelry-books Buy Orchid Jewelry: ~ http://www.ganoksin.com/shop ____________________________________________________________________ -Unsubscribe: -Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank ____________________________________________________________________ |
||
| Navigate: | ||
|
||
| Orchid Resources: | ||
|
Join & Post Invite a friend to join Orchid F.A.Q Galleries BenchExchange Orchid Message Archives [Subject Index] [Date Index] Ganoksin now offers a number of ways for you to stay on top of the latest from Orchid!
|
||
© Copyright 1996 - 2008, The Ganoksin
Project