[Jewelry making - Article 01182] - Re: [Orchid] High speed spindle

[Tim Blades]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

Hi Justine,

>     I'd love to see a picture of that. I have a Roland MDX-15 and it
>     does what I need 

    I put my system together myself, but itis easier to get it from
    http://fourth-axis.com/motor-mount 

    they do an external controller as well
    http://fourth-axis.com/external-spindle-controller 

    Chris Cheer posts here sometimes( Hi Chris!!) he will tell you all
    about it, he works for them, its not very complicated so he should be
    able to cope 

regards Tim Blades.
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________