[Jewelry making - Article 01132] - Re: [Orchid] Masking for sandblast

[fuzzi shu]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

Hi Jim

    I don't know if it will work on metal but when I was doing glass
    blowing we used a green rubbery material called 'butter-cut'...cause
    it cut like butter. Ba-dum ching. I don't know if that's the
    professional name for it but it is coated with a plastic on one side
    to keep it clean and clingy and the rubbery-side is easy to draw on
    and cut with an x-acto. It stuck very well to glass and I imagine it
    would do the same to highly polished silver. 

Good luck.
Cheers
Rachel
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________