[Jewelry making - Article 01128] - Re: [Orchid] High speed spindle

[Dave Arens]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

Hi Todd,

>     I was looking at the Proxxon IB/E professional grinder, which will
>     do 20,000, with a runout of 0.001". I also saw some air powered
>     spindles on Ebay, but aren't they noisy? Does anyone have any
>     suggestions? 

    I've got a Proxxon IB/E. It lives up to it's reputation. It's quiet,
    well balanced & long lived. 

    It's nose has a 20 mm ( little over 3/4") diameter collar about 11
    mm ( little under 1/2") long for clamping in a mounting fixture or
    some other machine. The on/off switch is separate from the speed
    control. 

Dave
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________