[Jewelry making - Article 01067] - Re: [Orchid] Harbor Freight Mini Cut-off Saw

[Mark Noll]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

>     I am looking for are about the size of a pencil lead. 

    Here is another source: 

    Canemco & Marivac
    Products for Electron Microscopy and Histology

    #283-178
    Micro-Diamond File (Round) 0.250mm ( 0.010")

    #283-179
    Micro-Diamond File (Round) 0.5mm (0.020")

    #283-180
    Micro-Diamond File (Triangular) 0.5mm (0.020")

Should be small enough
Mark
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________