[Jewelry making - Article 01064] - Re: [Orchid] Masking for sandblast

[John Dach]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    Thick coats of rubber cement might work. You need something that is
    soft rubbery or soft plastic. Might be able to use the tool handle
    dipping stuff you can get in hardware stores. Mold making latex might
    work. I do larger work and there is special resist just for the work.
    Heavy plastic sheets with or without adhesive on the back. Duct tape
    might even be a way or even thicker is a tape used to wrap gas pipes
    (natural/propane) that is 10+++ mils thick. Glue down some thick
    plastic sheeting. Looks like trial and error time. 

John Dach
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________