[Jewelry making - Article 01009] - Re: [Orchid] Bench dimensions

[Elaine Luther]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

>     does anyone have suggested dimensions for a jewelers bench, hieght
>     from floor to top, how deep should it be made, how far the catch 

    You can find complete plans in the book, The Complete Metalsmith, by
    Tim McCreight. 

    Pat Pruitt has posted detailed instructions on builiding one in wood
    and steel: 

    http://www.patpruitt.com/blog/?page_id=6 

    and here is a free article by Tim McC right here on ganoksin: 

    http://www.ganoksin.com/borisat/nenam/basic-bench.htm 

Elaine
http://www.CreativeTextureTools.com
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________