[Jewelry making - Article 00983] - [Orchid] Rust on tools

[Naomi]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    I have recently set up a studio in my garage. My tools have begun to
    rust and the rust spreads quickly on the tools. I have gone to the
    local hardware store and purchased a Naval Jelly rust dissolver and
    3M multi purpose lubricant spray. The Naval Jelly works OK at
    removing the rust however the steel is discolored from where the
    rust was. I use the lubricant spay to hopefully keep the rust from
    coming of from appearing on the tool. Does anyone have any
    suggestions? 

Thanks,
Naomi
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________