[Jewelry making - Article 00975] - Re: [Orchid] Harbor Freight Mini Cut-off Saw

[Carol Stall]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    Oops-- I didn't read that well enough. You are looking for finer
    toothed blades. 

    There is a source of diamond "cut-off" blades -- which is J. Walter,
    Inc. 

    Not sure if this will work or not. They are a wholesaler. 

    This small-diameter cut-off wheel is excellent for cutting steel and
    stainless steel. They are available in 2", 3" or 4" diameter and
    from 1/32" to 1/2" thickness. (50, 75 or 100mm diameter, 1mm - 12mm
    thickness. In addition, Zip(TM) wheels boast an excellent wheel life
    and cool cutting temperature. 

    http://www.globalspec.com/featuredproducts/detail?exhibitId=39890
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________