[Jewelry making - Article 00781] - Re: [Orchid] Add silver lining to wood bracelets

[Joel Schwalb]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

Mark,

    I would suggest that you use fine silver strip, 28 or 30 gauge. Using
    fine silver will allow you to easily burnish the edges over the
    interior radius by hand. You will need a burnisher similar to
    #113-017 in the Rio Grande catalog  AT  $7.50. It shouldn't take more
    than a few minutes. 

Joel
Joel Schwalb
www.schwalbstudio.com
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________