[Jewelry making - Article 00541] - Re: [Orchid] Silver solder laser wire

[james newton]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    Mostly I use Argentium wire with the laser, but I occasionally find
    that I need to back way off on the voltage with some pieces of
    questionable nature, and just use the silver solder laser wire. It
    is not my first choice, butit will get the job done on some of the
    lower quality pieces.
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________