[Jewelry making - Article 00317] - Re: [Orchid] Favorite Tubing Cutter?

[Joel Schwalb]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    I purchased a "Mini Cut-Off Saw", item # 42307, from Harbor Freight
    for about $30 a couple of years ago. It is basically a small chop saw
    and does a great job in cutting tubing. It has an adjustable fence
    that can be set from 90 to 45 degrees. It is fine for occasional use,
    don't know how it would hold up under continuous production use.

Joel Schwalb
www.schwalbstudio.com
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________