The Gem and Jewelry World's foremost Resource on The Internet.
Re: [Orchid] GraverMach is it worth it?  
  [Thread Prev] [Message Prev]      [Date Index]   [Thread Index]      [Message Next] [Thread Next]
From: james newton
Date: Mon Mar 03 20:26:44 2008
 
     
========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    I too have been at the bench for over 30 years: combining the normal
    a= ging process with several motorcycle accidents has resulted in
    damaged rotator cuffs, torn tendons and bone spurs, severely
    impacting my ability (or desire) to do some of the more demanding
    pushing motions. I was still doing all this by hand till last year's
    Bench Jewelers conference in Buffalo. There I "played" with the
    Graver Max, and was hooked! I also picked up the Meji microscope. The
    combination of these two tools has not only taken the strain off of
    my shoulder, but the quality of my work has improved exponentially.
    Continually I am finding new ways to use the Graver Max, and making
    new tools as I see new possibilities. Not only is engraving and bead
    raising much easier, but so are all forms of bezel, channel, flush,
    gypsy, etc. Some of this was always possible with the flex hammer,
    but now I have more control with less vibration, and the quick change
    tool holders make all kinds of adaptations possible, and allow very
    rapid changes between tools. 

    Admittedly I can be a bit of a tool addict, but the increase in the
    d= etail and quality of the work I have achieved speaks volumes for
    these two tools. It has been many years since I have felt this good
    about an increase in my abilities. The new tools and networking more
    with other bench jewelers have opened my eyes to many new
    possibilities. 

Hope this helps. Jim
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________

  Click to Visit  
     
  Navigate:  
   
  Orchid Resources:  
   Join & Post
 Invite a friend to join Orchid
 F.A.Q
 Galleries
 BenchExchange
 Orchid Message Archives [Subject Index] [Date Index]

Ganoksin now offers a number of ways for you to stay on top of the latest from Orchid!

  1. My Yahoo - Do you have a My Yahoo page? If so, you can easily read the latest Orchid posts on your personalized page by adding this feed:Add Orchid to My Yahoo!
  2. Add Orchid to myGoogle Add to my Google
  3. Read Orchid with NewsGator and Microsoft Outlook Add Orchid to Your  NewsGator
Support Orchid! - If you believe in what we're doing, you can help!

 
     
     

© Copyright 1996 - 2008, The Ganoksin Project