[Jewelry making - Article 00010] - Re: [Orchid] Gas PSI's for Swiss Torch

[DAVEMARTAI]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    I have the Swiss Torch from Otto Frei with the casting head. If you
    look on the torch head near the threads, you'll see stamped notation
    of O2 3 Bar and P 1.5 Bar. 

    1 Bar is 14.504 PSI, so, set your O2 at 43.5 psi and set your
    propane at 21.75 psi (44 and 22 works well for me and is easy to
    remember) 

Marta
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________