[Jewelry making - Article 01065] - Re: [Orchid] FTC guidelines

[leonid surpin]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

>     No! If you hold the part you are working on in your hand, in a pin
>     vise, a ring clamp, or a engravers vise and perform a task using
>     hand tools or any tool that you hold in you hand, in my opinion,
>     that is hand work. If you put the part in a machine and the machine
>     perfroms a process, to me you are not doing it by hand. 

    I just want to re-enforce the point. 

    Problem of holding things in jewellery making, is the most
    frequently encountered, and the most difficult to solve. 

    The reason that some projects are never see the daylight, is that
    problem of holding was not approached correctly. 

leonid Surpin
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________