The Gem and Jewelry World's foremost Resource on The Internet.
Re: [Orchid] Experience with LaVaque Tweezers  
  [Thread Prev] [Message Prev]      [Date Index]   [Thread Index]      [Message Next] [Thread Next]
From: Neilthejeweler
Date: Thu Feb 21 20:05:29 2008
 
     
========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    Interesting concept but I think the hose clamp makes it look
    jerryrigged and unprofessional. I might try em anyway sometime. 

    It may be beneficial to some folks. I've done so many heads I've
    learned to compensate for lack of visual access. I might liken it to
    setting burs... in the beginning I would agonize over getting a level
    seat, scrutinize and readjust, spend far too long doing it and
    despite great effort the stone would be crooked as often as not.
    These days I just do it without too much consideration, it becomes
    'feel'. Same with the tweezers. Tip though... cut a small notch at 
the
    inside apex of the curved jaw, install your parts at 90 to what the
    tool was designed for. Now you can see from both shoulder aspects
    plus one full side. Also, if you put accurate flats on your mating
    surfaces, the parts are more naturally aligned, as viewed from face
    up, so a twisted orientation is eliminated. That is probably a
    totally unclear description, sorry. Would take 10 seconds to show you
    in person. 

    What would be a great improvement in H&S tweezers is to do away with
    the slide spring thingy...inconsistent pressure adjustment and the
    findings are prone to slippage when the metal heats up and changes
    surface friction. Maybe even just a stop screw would do the trick.
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________

  Click to Visit  
     
  Navigate:  
   
  Orchid Resources:  
   Join & Post
 Invite a friend to join Orchid
 F.A.Q
 Galleries
 BenchExchange
 Orchid Message Archives [Subject Index] [Date Index]

Ganoksin now offers a number of ways for you to stay on top of the latest from Orchid!

  1. My Yahoo - Do you have a My Yahoo page? If so, you can easily read the latest Orchid posts on your personalized page by adding this feed:Add Orchid to My Yahoo!
  2. Add Orchid to myGoogle Add to my Google
  3. Read Orchid with NewsGator and Microsoft Outlook Add Orchid to Your  NewsGator
Support Orchid! - If you believe in what we're doing, you can help!

 
     
     

© Copyright 1996 - 2008, The Ganoksin Project