[Jewelry making - Article 00912] - Re: [Orchid] Rolling mill stand on concrete

[Rmchristison]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    My Durston Rolling Mill is mounted on a 1 inch thick steel block 6
    1/2 in x 7 1/2 in. That is mounted on a steel 2x2 in "stem" which is
    35 inches above the base plate which is made of a thick steel block.
    These joints are all welded and bolted to a steel base which is 19
    1/2 x 33 in. This whole assemblage is sitting on one of the four
    wheeled/carpeted rolling furniture moving devises. I stand on the
    base plate and the mill is just at waist high. The whole thing can
    be moved around the studio. 

    My son is a machinist and he and his buddy built the assemblage -
    said it would be around in the year 3000!. 

Rose Marie Christison
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________