[Jewelry making - Article 00871] - Re: [Orchid] Red pitch and a bowl

[Kjell Hansen]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    I put my pitch bowl on a buncin burner and then put the pitch in the
    bowl and let it slowly heat up. The pitch slowly melted into the
    bowl. I would completely remove the pitch from the foil before
    putting it in the bowl. It shouldn't take to long and you don't
    really need to get it all that hot. If you have any other questions
    let me know. 

Kjell
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________