[Jewelry making - Article 00774] - Re: [Orchid] Sealing Patina Colors

[RMS]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    Ok, time to stick my nose in here! It may be the delivery method that
    is the biggest problem. If you want to produce a thin sealant then
    you need more then a clunky spray can. You need an air brush. There
    are many on the market and can be very cheap. Find and purchase the
    best, clearest whatever finishing product you like. Cut it with
    thinner until it is water thin. Now use an airbrush to apply a thin
    coat. Maybe two coats. You will need a hood to draw off the fumes. Be
    careful, having a torch around this mist might not be a good idea. 

Bill
Bill, Deborah & Michele
Reactive Metals Studio, Inc
928-634-3434, 800-876-3434, 928-634-6734fx
http://www.reactivemetals.com
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________