[Jewelry making - Article 00773] - Re: [Orchid] Castaldo VLT blue silicone life expectancy

[Kenneth Ferrell]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    Bill the words in this post were not directed at Yours nor Castaldos
    fine products, I used both for some years and have had no complaints
    about either, my comments were more directed to the thread
    originator, Believe me the comments based on that, were more than
    knowledge based.. Both RTV and Low Temp are great, I used them quite
    often to make master molds for customers carved wax patterns, also
    for waxes that were previously injected from someone else's molds, so
    I could reproduce them with out much loss to shrinkage or if they no
    longer had a master just a wax pattern or two laying about, and I'm
    sure that's why Chas was inquiring About the durability, he probably
    has a few waxes he wants to copy in a hurry! Right Chas? 

Regards
Kenneth Ferrell
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________