[Jewelry making - Article 00715] - Re: [Orchid] Proper height for a jewelers bench

[juliette arda]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

Bonjour

>     And, is a bench skin a piece of fabric that can be attached ? 

    A bench skin is piece of leather, about 1 squaremeter, smooth side
    up attached under the bench so it is between your knees and the bench
    surface. take a look at the bench exchange pages you'll get it better
    than I could write it. 

    You can purchase bench skin in most jewellery tool suppies but mine
    in simply a piece of an old leather sofa screwed directly in in the
    legs of my bench.. Avoid fabrics because the metal filings will be
    stuck in it and it is easily pierced by tools. 

here you go...
Juliette
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________