[Jewelry making - Article 00704] - Re: [Orchid] Proper height for a jewelers bench

[Larry Silva]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

Karen,

    The rule of thumb is that the top of the bench should be armpit
    level. 

    With the chair and blocks under the legs, the adjustment can be made
    which will ensure that you have a comfortable and ergonomic bench at
    which to work. 

    If after these adjustments the drawer still hits you in the legs,
    then just relocate the drawer. 

Larry Silva
Da Gama Designs
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________