[Jewelry making - Article 00700] - Re: [Orchid] FTC guidelines

[Richard Hart]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

>     Basically, handmade jewelry must be made without the use of
>     electricity, and that includes drilling. I was taught that it
>     doesn't include polishing, but that may or may not be true - I
>     don't use the term except casually anymore, myself. were
>     accomplished by hand labor and manually-controlled methods which
>     permit the maker to control and vary the construction, shape,
>     design, and finish of each part of each individual product. 

    I read : "were accomplished by hand labor and manually-controlled
    methods which permit the maker to control and vary the construction,
    shape, design, and finish of each part of each individual product." 

    Flex shaft is manually controlled method. I have not been able to get
    mine to do anything without me holding it. If I have a choice of
    where I drill a hole, is that not varying the construction, shape, or
    design? 

Richard
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________