[Jewelry making - Article 00640] - Re: [Orchid] Epoxy question

[Stephen Wyrick]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    find some non-sterile smallest hypodermic syringe, disposal type,
    mix your epoxy, use shaped ice cream stick or a dowel or toothpick.
    put what you need in the barrel and inject your hearts or any thing
    else that needs it. use this application when you have multi-jobs
    only, otherwise it will be a waste. Before you insert the wire in the
    hearts, take your exacto knife and put barbs on the wire like a
    fish-hook, and push them on top of the epoxy and the only way this
    wire is coming out is by drilling and hope that the object is harder
    than silver - otherwise your bit will glide to the path of least
    resistance. 

Hope this helps, Stephen
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________