[Jewelry making - Article 00592] - Re: [Orchid] Epoxy question

[Beverly Jones]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    I bought some drilled turquoise hearts in Tucson which I plan to
    turn into pendants for necklaces. I have some 16ga wire that fits the
    hole, but not snugly, and I want to fashion a pendant bale out of
    this wire. There is probably some dust from the drilling in the hole
    that I won't be able to remove. What epoxy would be best for this?
    Also I would need some sort of applicator to get the epoxy into the
    hole? Any recommendations? 

Thanks,
Beverly
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________