[Jewelry making - Article 00447] - Re: [Orchid] Otto Frei's Economy Rolling Mill

[Alma Rands]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    I am the fortunate owner of a Karat rolling mill made by Kenneth
    Singh. I really give that mill some hard work, and it has never let
    me downl It came with flat rollers, and several other rollers for
    rolling down wire. It is a sturdy, well made little mill, and best
    of all was affordable. 

    I was not sure how to assemble it when it was delivered (several
    years ago), but Kenneth Singh was kind enough to walk me through the
    whole process. 

    You can really rely on the Karat rolling mill. Unless you are into
    heavy duty production work, you will find the little Karat up to the
    job, and then some. 

    Usual disclaimer---just a happy satisfied customer. 

Alma Rands
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________