[Jewelry making - Article 00437] - Re: [Orchid] Making ring of solid mokume gane

[RMS]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    Philip, What is the material make up of the rod? Does it contain a
    copper element? Then it may not be a good choice for a ring. It will
    look great, but many problems may evolve from wearing it. Essentially
    you have the correct steps laid out. Unfortunately or fortunately,
    depending on your point of view, this is a very creative material to
    work and there really is no "right" way. Bill 

Bill, Deborah & Michele
Reactive Metals Studio, Inc
928-634-3434, 800-876-3434, 928-634-6734fx
http://www.reactivemetals.com
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________