[Jewelry making - Article 00418] - Re: [Orchid] [Source] Large steel bench block?

[Rick]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    I have a 35 lb anvil that I got from Cliff Caroll a local horseshoer
    (Farier) supply place. He makes them himself in Larkspur, Colorado.
    He ships worldwide. In fact he sells them to one of the major
    jewelry suppliers. He also carries 70 lb and 125 lb models. They are
    made from hardened cast iron. Hardened steel anvils are the best but
    you will pay more for them. Cliff Caroll anvil start at $144 for the
    35 lb. 

    You will need to work on the surface with some emory paper because it
    is finished with probably 120 grit and it will leave lines in silver
    and gold. 

    http://www.cliffcarroll.com

Rick Copeland
rockymountainwonders.com
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________