[Jewelry making - Article 00228] - Re: [Orchid] Using wolf belt sander

[Rick Hamilton]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    I bought one, and it had an alignment problem. Kate replaced it as
    soon as she got new stock. It works well, and there are a selection
    of belts and grits for it. I made a little adaptor for my Micro-Star
    dust collector. I think that it is a well thought out, reasonably
    priced tool. As far as I know there aren't any polishing belts for
    it, but it can be used to sand or grind anything that you would do at
    a polishing lathe or with a flex shaft. Polishing belts, similar to
    the felt surfaced Moore's disks, would be nice for flat lapping. 

Rick Hamilton
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________