[Jewelry making - Article 00217] - Re: [Orchid] Venting a torch for a classroom

[rcjewelry]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

Dear April,

    Do you have a window in that office? If so, place the soldering
    station in front of the open window and set up a small box fan that
    is between the soldering station and the window. Position the fan so
    it gently pulls the fumes AWAY from you and TOWARDS the open window.
    The fan shouldn't be so strong that it blows the torch flame out. 

    It works, low tech, low cost. Good luck and happy soldering. 

Ruthie Cohen
www.mmsjl.com
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________