[Jewelry making - Article 00155] - Re: [Orchid] Inside ring abrasives

[jericcoleman]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    I to size about 30 to 40 rings a day. I use a larger Ball bur for
    taking the metal down quickly only on rings that I have sized up. I
    do all up size rings with this at the same time. I have found that
    the Cartridge rolls medium grade are the best and I buy a gross at a
    time. There Cheap. Then I finish the inside and out with a brown
    rubber wheel before polishing. I am a contract Jeweler and time is
    money. Are you a contractor?Working at the Bench for 27 years, I have
    came up with the fastesd production process. Any questions please
    E-mail me off line. 

Thanks Johneric
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________