[Jewelry making - Article 00144] - Re: [Orchid] International ring sizing standard

[saw]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

Hello Jim,

    There is great confusion about ring sizing even when everyone is
    using the same scale. It gets even worse when you try to compare to
    other systems. The root cause is that many people cannot measure
    things very well. I put together a web page that is pretty good for
    comparison, but it also has a reality check so that you and your
    customer can see if the size they think they are is realistic. You
    can see it at 

    http://www.celtarts.com/ring_size.htm 

    This chart was worked out by my mathematician wife. He specialty is
    multiplying (six kids) but she is also pretty good with spread
    sheets. 

Stephen Walker
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________