[Jewelry making - Article 00049] - Re: [Orchid] Building servo driver

[John Donivan]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    Ian, my own weakness is electronics, meaning I'm no good at it
    either. Here's some links about homemade CNC that might be helpful,
    though: 

        http://www.cnccookbook.com
        http://www.cnczone.com
        http://www.cadcamcadcam.com
        http://www.geckodrive.com
        http://www.ktmarketing.com/CNC.html
        http://www.homeshopcnc.com
        http://www.kelinginc.net
        http://www.homecnc.info/cnc-main.html
        http://www.majosoft.com/majosoft_s_hobby_site.html
        http://www.xylotex.com

    There's more, but there's always more. Quite the cottage industry
    there....Good luck! 

http://www.donivanandmaggiora.com
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________