[Jewelry making - Article 01553] - Re: [Orchid] Cutting Ebony

[Terry Ogden]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

Linda

    Not sure what your project is, but usually if I work with wood, I use
    wood tools to cut it with. Thought of a scroll saw, or maybe even a
    band saw, not trying to be a smart'a', but you don't say if your
    engraving it, flat cutting, resaw or what. 

Terry
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________