[Jewelry making - Article 01481] - Re: [Orchid] Is it firescale or not?

[Rick]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

>     It certainly sounds like fire-stain and once there, there is no
>     other solution than to polish it out. 

    To get rid of fire scale I switch between bobbing compound and Zam.
    I use the Zam to identify where the fire stain is at then hit it with
    the bobbing compound. Once most of the firescale is off I finish up
    with Zam. It does a pretty good job on small spots of firescale and
    puts a nice polish on silver. 

Rick Copeland
Silversmith and Lapidary Artisan
Rocky Mountain Wonders
Colorado Springs, Colorado
rockymountainwonders.com
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________