[Jewelry making - Article 00568] - Re: [Orchid] Diamond cuts technicals

[leonid surpin]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

>>    ...If their stone, while set, shows metal of the ring they are set
>>    in, it is not a diamond.. 

>     i believe your statement is incorrect.

    With all due respect diamonds do not have see-through areas. If you
    draw a pencil line on the paper, orient a diamond with its culet
    pointing at the line and look through the table, you would not see
    the line if it is a diamond. 

leonid surpin
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________