[Jewelry making - Article 00468] - Re: [Orchid] Tutorial: Polishing Metals

[Kevin P. Kelly]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

>     I hope you clarify for newbies that you are talking about a single
>     right handed spindle as far as the clock example goes. If newbies
>     are buffing on a double spindled buffer as many shops and schools
>     use on the left side of the buffing machine 6:00 to 8:30 is not a
>     safe place to buff. 

    "the buff rotates toward you'" is part of what I said, which applies
    to single or double spindles. I think a person of average
    intelligence could extrapolate. 

    Perhaps I should also have included "do not attempt this without
    supervision" and a liability disclaimer. As has been stated before we
    use tools that have the capacity to harm the user. 

KPK
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________