[Jewelry making - Article 00458] - Re: [Orchid] Computerized engraver recommendations?

[ErichCDesigns]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    Thank you both very much for the information you provided! Based upon
    the emails I've received and the conversations I've had with various
    companies, I think that the Gem-RX4 is going to be my best bet.... at
    least considering my price range. Thanks again for all your help! 

Sincerely,
Erich C. Shoemaker
http://www.erichcdesigns.com
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________