[Jewelry making - Article 00446] - Re: [Orchid] Tutorial: Polishing Metals

[J Morley]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    I hope you clarify for newbies that you are talking about a single
    right handed spindle as far as the clock example goes. If newbies
    are buffing on a double spindled buffer as many shops and schools use
    on the left side of the buffing machine 6:00 to 8:30 is not a safe
    place to buff. It would be obvious to us but not to the untrained
    novice who could easily whip a chain into themselves or others using
    your example. 

Cheers
J Morley Goldsmith/Laser welding
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________