[Jewelry making - Article 00366] - Re: [Orchid] How do you store your wire?

[Tina]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    I took a tool from my husbands work area, I tried to find a picture
    on the Home Depot but no luck so I will try to describe: 

    I use a peg hook board that is just one board around 3 feet long
    with long wooden dowel rods that are made to go into the holes. (It
    was used to hang rakes and such in the garage) I then hung it
    vertical behind my door and I hang my loose silver wire on the pegs.
    Most of my wire is on spools so they fit nicely. The ones that are
    not, I used a long board hung horizontal and put metal hooks to hold
    the wire in baggies. 

Hope this made sense,

Tina in Texas
CreatedWithFire Studio's
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________