The Gem and Jewelry World's foremost Resource on The Internet.
Re: [Orchid] Tutorial: Polishing Metals  
  [Thread Prev] [Message Prev]      [Date Index]   [Thread Index]      [Message Next] [Thread Next]
From: Kevin P. Kelly
Date: Mon Jan 07 04:27:09 2008
 
     
========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    Safety has been little mentioned in this thread. You can do yourself
    serious injury in the polishing process if you're not careful. 

    There is nothing comparable to a polishing lathe. say a Baldor.
    Anything else is an inferior substitute. Foredom makes good
    equipment, but that little polishing motor is a toy. If you can't
    afford the necessary tools disregard all this. If you intend to do
    this work professionally this may be helpful. 

    The lathe whispers when running, not a lot of noise. Since it makes
    little noise one may not take it seriously; but it can do serious
    harm to the inattentive. 

    Say you're using a 6" buff, the buff rotates toward you. If you look
    at the buff from the end of the spindle look at it as though it's a
    clock face. I'm talking analog here. The safe area is between 8:30
    and 6:00 o'clock. If you go higher above the center line of rotation
    you can get into trouble. Once you're comfortable with the machine
    you can break the rules; of course at a certain risk. 

    If you lucky you'll get bitten by the machine without serious injury.
    That way you'll feel how much power there is in this machine and
    treat it with respect. 

    The dust collection system is another story. 

    In making jewelry there's possibility for serious injury. Polishing
    maybe the most dangerous area. 

    Your experience may vary. 

KPK
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________

  Click to Visit  
     
  Navigate:  
   
  Orchid Resources:  
   Join & Post
 Invite a friend to join Orchid
 F.A.Q
 Galleries
 BenchExchange
 Orchid Message Archives [Subject Index] [Date Index]

Ganoksin now offers a number of ways for you to stay on top of the latest from Orchid!

  1. My Yahoo - Do you have a My Yahoo page? If so, you can easily read the latest Orchid posts on your personalized page by adding this feed:Add Orchid to My Yahoo!
  2. Add Orchid to myGoogle Add to my Google
  3. Read Orchid with NewsGator and Microsoft Outlook Add Orchid to Your  NewsGator
Support Orchid! - If you believe in what we're doing, you can help!

 
     
     

© Copyright 1996 - 2008, The Ganoksin Project