[Jewelry making - Article 00226] - Re: [Orchid] Problems with Pepe Mill sold by Stuller

[Jwryrubber]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

>     At least now I know what I'm doing to my little Pepe

    Good for you Dar! 

    Having been in manufacturing for over 40 years, I can tell you that
    very often, the only way we can repair large machinery is to
    re-create the broken parts, or at the very least, search for similar
    parts at used machinery barns. In the case of gears--most gears can
    be found in industrial catalogues.. 

    Repairing small mechanical equipment is often not practical. By the
    time you're done, it may cost more than a new piece. 

    Large machinery is different. 

    As an example, today we are re-creating the entire mechanical track
    system for our traveling head Die cutting press. This is critical
    equipment as we use it to cut all our mold rubber strip, pre-cut
    pieces and all our casting gasket materials. It needs to be on the go
    at all times. 

Cheers!
Bill Mull
Zero-D Products, Inc.
http://www.zerodproducts.com
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________