[Jewelry making - Article 00220] - Re: [Orchid] Soldering tube settings together

[Helen Hill]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

>     The traditional way is to use clay, but long ago I switched to
>     sculpting wax, which models like clay and is much cleaner. You get
>     your clay or wax and smash it into a small pancake.

    Brilliant suggestion John. I've made a few pieces like this and like
    you suggest, after joining about three run into problems where
    subsequent joint just don't want to work, so I'll look into what you
    advise. 

    Thanks again. 

Helen
UK
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________