The Gem and Jewelry World's foremost Resource on The Internet.
Re: [Orchid] Soldering tube settings together  
  [Thread Prev] [Message Prev]      [Date Index]   [Thread Index]      [Message Next] [Thread Next]
From: John Donivan
Date: Fri Jan 04 07:36:40 2008
 
     
========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

>     You are not seriously suggesting soldering while using Jet Set as
>     a fixture? The result would be a flaming mess 

    There is only one way to solder several to many small pieces together
    effectively. I will juggle two or three, but no more than that. You
    can use a soft pad and imbed your parts, but that's inferior for a
    variety of reasons. The traditional way is to use clay, but long ago
    I switched to sculpting wax, which models like clay and is much
    cleaner. You get your clay or wax and smash it into a small pancake.
    You get your parts and arrange them right side up as you want them,
    sunk about 1/2 way or so into the clay or wax. You get a piece of
    heavy paper or light cardboard (cereal box), bend it into a circle
    and tape it shut, making a dam, and then sink that into the wax
    around your parts. Fill the dam with investment, let it set up 1/2
    hour or more, pull off the wax or clay, and there are your parts
    imbedded in investment. Steam and solder and quench and out comes
    your assembly. For settings and things with tapered sides you may
    need to lay bits of wire or balls in the gaps - the tops will be
    together but the bottoms will not. This method is also how people
    make things like whole bracelets made of settings and the like, using
    special mandrels. This is the best way, it's the only really
    foolproof way, and believe me, I tried them all. 

http://www.donivanandmaggiora.com
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________

  Click to Visit  
     
  Navigate:  
   
  Orchid Resources:  
   Join & Post
 Invite a friend to join Orchid
 F.A.Q
 Galleries
 BenchExchange
 Orchid Message Archives [Subject Index] [Date Index]

Ganoksin now offers a number of ways for you to stay on top of the latest from Orchid!

  1. My Yahoo - Do you have a My Yahoo page? If so, you can easily read the latest Orchid posts on your personalized page by adding this feed:Add Orchid to My Yahoo!
  2. Add Orchid to myGoogle Add to my Google
  3. Read Orchid with NewsGator and Microsoft Outlook Add Orchid to Your  NewsGator
Support Orchid! - If you believe in what we're doing, you can help!

 
     
     

© Copyright 1996 - 2008, The Ganoksin Project